 |
 |
 |
 |
 |
|||||||||
 |
|||||||||||||
|
|
Adhesive Technologies |
||||||||||||
|
|
|
||||||||||||
|
|
|||||||||||||
|
|
|||||||||||||
|
|
|||||||||||||
 |
Adhesive Tech™ MT500 Manual Feed
5/8 inch Round Adhesive, 120 Volt construction HT #0357 LT #0356 This version operates manually. The unique palm-feed actuator offers a well-balanced design for comfortable use with less hand fatigue. It is available in two pre-set temperature choices: high temp (HT) 400° F/ 500 watts; low temp (LT) 300° F/ 400 watts depending on the application requirements. Output: 5 lb/hr, Output/unit feed: 2.5 grams / stroke, Nozzle: check valve with removable tip, Temperature Control: Preset electronic thermostat, Weight: 1.9 lb |
||||||||||||
 |
Adhesive Tech™ PT500 Pneumatic Feed
5/8 inch
Round Adhesive 120 Volt construction HT
#0357 LT #0356 The Adhesive Tech™ PT 500 pneumatic applicator provides a high delivery volume of adhesive (up to 7 lb/hr) without hand fatigue. It has an extended check valve nozzle for enhanced glue line visibility and control. It is light in weight and very well-balanced, which makes it ideal for high volume packaging and product assembly applications. It is available in two pre-set temperature choices: high temp (HT) 400°F/ 500 watts; low temp (LT) 300°F/ 400 watts. Output: up to 7 lb/hr Output/unit feed: 5 grams / stroke Nozzle: check valve with removable tip Temperature control: Preset electronic thermostat Air pressure required: 40-100 psi Weight: 2.5 lb |
||||||||||||
 |
Adhesive Tech™ Leader1/2 inch
Round Adhesive 120 Volt construction HT #0152 LT #0153 Our workhorse, the Leader, is a high volume handgun that delivers over 3.7 lbs. of adhesive per hour through a unique melt grid chamber. It can keep up with almost any high volume application and its high delivery rate reduced hand fatigue -- no heat loss slowdowns or increased feeding force. Watts: 125 Output: HT up to 3.7 lb/hr. LT up to 3.5 lb./hr. Temperature Control: Preset electronic Operating temperature: HT 400°F, LT 300°FWeight: 1.5 lb |
||||||||||||
 |
Adhesive Tech™ Pro-90 1/2
inch Round Adhesive 120 Volt construction HT #0900 The Pro-90 is a perfect complement to our larger glue guns. It uses a state-of-the-art PTC* heating system for accurate temperature control and its simple, compact design is perfect for small applications where precise adhesive placement is required. It is ready to use in under 4 minutes. It offers great performance for a fraction of the price you would expect to pay for such a reliable handgun. Watts: 40 Output: HT up to 2.2 lb/hr Temperature Control: PTC* type Operating temperature: HT 380°F Weight: 10 ounces *PTC -- Positive Temperature Coefficient self-regulating, solid-state heater. |
||||||||||||
 |
Adhesive Tech™ B-600S Pneumatic Hot Spray System
The Adhesive Tech™ B600-S Hot Spray System
is an effective, safe, OSHA-compliant, non-toxic alternative to aerosol
adhesives. Plus, the B600-S delivers significant savings over the
typical hot spray or VOC method.
Designed to be used with both high-temp and
low-temp glues, the Adhesive Tech™ B600-S Hot Spray System represents
state-of-the-art engineering that meets the needs of the industrial job
site. This precision tool features several unique controls.
|
||||||||||||
 |
CB900 Portasol Cordless Bonder Manual Feed
1/2 Inch Round Adhesive Butane HT #CB900 Kit #CB900K The CB900 Cordless Bonder is balanced, providing a comfortable feel in use. The tank location gives it a familiar portable power tool appearance and contributes to the overall ergonomics. This tool can tackle almost any hot melt application with a fast 5 minute warm-up time and uses readily available 1/2" round standard high temperature glue sticks. Glue Sticks: 1/2" (12 mm) standard round glue stick Temperature: 400°F (204°C) warm-up time 5 minutes Applicator Size: 10"L x 11"H x 2.5"W (254mm x 280mm x 64mm) Light Weight: 1.65 Ibs. (741 g) - Kit Weight: 5.25 Ibs. (2.4 kg) Stroke Length: 1/2" (12 mm) Cordless Fuel Capacity: 2 oz. (56 g) Refill: one charge lasts up to 2 hours CB900 Nozzle Thread: 7/16 - 20-UNF Warranty: 1-year limited Includes self-storing, built-in stand Contents of CB900K Kit include: • CB900 Butane Gun with brass nozzle • Storage case • 3 Extra brass nozzles - needle, side cut, and spreader • 12 FREE Packaging Adhesive Glue Sticks
|
||||||||||||
 |
|||||||||||||
|
|
|||||||||||||
|
|
|
|
|
|
|||||||||
|
|
|||||||||||||
|
|
|||||||||||||
